Making the interface work for me
Often times the controls for a piece of software are not the friendliest locations for one-handed operation. By one-handed operation I mean one hand on the keyboard, one hand on the mouse. When working in graphic programs I find myself working that way quite often. It could be as basic as a drawing program where I need to use the Z key to initiate the zoom function and then using the mouse to decide where to zoom. Other times it is more complex, such as selecting an image, zooming into a one pixel to one pixel rendering, panning, and then marking the image as a keeper or a chucker. It could just as likely be a drawing program where I am documenting an idea. For my #AVTweeps, just think AutoCAD.
Recently I found myself being sore at the end of an image review session from unnatural movements. My data management workflow is outlined at previous blog post. However looking at the actual process I began to find lots of moving of the hands. My review process is based around the use of Adobe® Photoshop® Lightroom® (quite the mouthful so Lightroom for short). The program itself is very powerful and does help me manage my images, pictures, and photos. The program lacks some ergonomics for the one handed user.
The way I cull images is I go into the library mode and review the images at a resolution to fit onto the screen. I then quickly look at it and decided if it is a Pick, Unmarked, or a Reject. These selections are done using the P U and X keys. Notice how they are laid out on the keyboard.
Not very easy to navigate with one hand. Now let’s say I want to zoom into an area, one can either use the mouse to enter a 1:1 view or press shift and spacebar to enter the same mode, then use the mouse to zoom to areas. I do this to see how much aberration is viewable and if it is in focus, once again I decide if it is a pick, unfledged, or rejected. Lightroom has a setting to advance to the next image after assigning a value to the image.
That setting seems like it would save time, and it does quite often. However if I want to assign two things to an image, I have to back up to the image. If I find an image of the same subject later in the batch that is better than a pick I decided on, I go back to unmarked the previously picked image. So now I have a few options. I can expose the filmstrip at the bottom of the application window and click on it with the mouse and then press U. If this image was just the previous image I can use the arrow keys. If you notice both of these options require me to take my right hand off the mouse and place it on the right half of the keyboard. Now I could also just use my left hand on the right side of the keyboard however that still means changing positions.
Let’s say I want to see if a crop makes an image better. An example of a crop changing an image happened at the baseball game I took pictures at, since I was sitting in the stands some of the images have the back of people’s heads in them. Cropping the heads out made the pictures better, but some were still chuckers not keepers. In Lightroom I enter crop mode by pressing R, this would enter Develop module, where I would use the mouse to make the crop. I would then finish with the crop. I would then want to mark the image as a keeper or chucker. I cannot do that in the Develop mode, I have to be in Library mode. To return to Library mode I would either take my right hand off the mouse to do the keyboard contortions or move the mouse away from the work area. Neither solution is very ergonomic.
There are keyboards available that are designed to fix some of these issues by changing the keyboard layout and having labels on the keyboard. However some are more expensive than the program itself. Also they are dedicated to the program, so I would still need my regular keyboard for such things as entering text. Not really an idea I was looking for.
I started thinking about it more and more and came up with a more practical solution in my not so humble opinion. I purchased a customizable gamer keypad, a Logitech G13 Programmable Gameboard with LCD Display as it is Mac compatible – yes it is also Windows compatible. (If you decide to buy one after reading my blog, using this link will give me a little commission.) This would let me decide how the keystrokes would be used. I could lay them out to my satisfaction.
I then determined what keys I used most. They are both left and right handed, and some of them require multiple hands, such as entering Library Mode (Command + Option + 1).
These main keys were then assigned to the keypad as I found would work best for me. (Drop me a line if you would like to copy of the configuration file.)
I had 200 plus images from a business trip and figured that would be a great way to test it out. So I went through the images, did the rating, cropping, and keywording in about an hour including uploading to a SmugMug gallery. There was another benefit that occurred that was unexpected, I was able to hide all of the tool palettes in Lightroom so the images were bigger on the screen during the review, remember bigger is better. I do not have exact times for similar tasks using the “standard” keyboard commands but the important thing is I was not sore and it was not as tiring to me.
The keypad allowed the thing that I think all tools should do, get out of the way and let me work. It did just that. Other than when I had to type in keywords, I used just the keypad and the mouse. I did not have to move my hands around the keyboard and mouse.
I also learned a couple more tricks in the process. I can use the keypad in more than one program, but keep the key functions the same. By key function I mean that the same key that sends an R to enter Crop mode in Lightroom can be configured to send a K in Photoshop or Command + K in Preview to perform the crop functions. The same key press to me, sends different keystrokes to the application. Much easier than having to remember all the different commands, similar to Cut, Copy, and Paste being the same in almost every program. That is a fine example of what I was trying to accomplish; cut (Command + X) copy (Command + C) and paste (Command + V) are not great mnemonic devices at first blush but the arrangement of the keys makes it very easy to use.
Understanding the Process
As things are becoming more and more automated, I feel that the understanding of the process is being lost. I believe that tools should make my life easier and allow me to spend my time doing other things. However there is a downside, does one always understand the automation that is being accomplished? While these can be great timesavers, what happens when it doesn’t work or you don’t like the results? Understanding the process that the automation process is simplifying is key.
A common example is defining an IP network. Most people simply connect to a network and let a Dynamic Host Configuration Protocol (DHCP) server assign the address. This happens at the office, the home, the coffee shop, pretty much everywhere. When it doesn’t work for whatever reason understanding where to start troubleshooting is a mystery to some. I use DHCP quite a bit; I also do know how to do the entire process manually. I can manually – not that I want to – calculate the subnet network and assign the addresses. When there is no DHCP, I am still able to get connected. If I am still unable to get connected, I am able to call tech support and describe the problem effectively.
While IP networking is a common example it occurs with other technologies as well. I do have an interest in photography and have been doing more processing on images. For some of the process I do it manually, for others I do use automation tool. An example of this process is this picture of Martin Brodeur I took.
Straight out of camera, no processing
I took the shot in a manual mode, shutter priority, I also told the camera where to focus to get Brodeur in focus and the background blurry. I could have accomplished a very similar effect using the Portrait Mode preset in the camera, but I wanted to control the look of the picture. After I took the picture I did some work on it in Lightroom, and Nik Software. In the process I adjusted for the lens, applied a vignette, applied noise reduction, and converted it to black and white. This process was a mix of manual and automated. I could have just clicked a few buttons and called it done. Instead I made decisions along the way, and I understood the impact of those decisions. I was able to decide the final mood of the image as a result.
Processed picture, click to see entire gallery
This result is much better because I controlled the process and got the result I wanted. Did using the automation for part of it save time? Yes it did save time. Since I had taken the time to learn about the conversion process http://www.dgrin.com/showthread.php?t=114917 I was able to understand the questions and obtain the result I wanted. Now if you will excuse me, I need to troubleshoot my network as the Wii is not connecting to the Internet.
Just because it is on the Internet doesn’t mean it is free
Recently I ran across this story http://thestolenscream.com/ about a picture that was taken from a photographer’s Flickr site and was being used around the world. He was not being compensated. It is both an amazing story of how something can go around the world from just being good and how at times people’s work is stolen. The video is 10 minutes long and is well done. The back story and video link is available here at http://fstoppers.com/fstoppers-original-the-stolen-scream/
Notice what I have done above, I clearly indicated where the information is located. I could have just as easily gone into YouTube and gotten an embed link to put into my blog. I also could have just as easily downloaded the video and edited out the credits. But that is an insult to the people who created it. I am basically stealing their time and effort.
I know that some of my readers are more familiar with audio video system integration than with photography. The same thing occurs there and other places as well. It might not be a picture it could be a grounding scheme or a user interface panel just for a sample. Perhaps it is finding information on a manufacturer’s website and including it in your information package. Often manufacturers are okay with that, if you are using the information to sell and use their products. However that does not always happen.
Last year I was very surprised when someone called me to complain about a training video I did that was on YouTube. I was not surprised that I got a complaint, rather I was surprised that it was on YouTube. I did not upload the video there. I uploaded it to my work website. Not a huge deal as it was information about our products, however it then started to sink in. This website had taken someone else’s work, made some edits, and were then presenting it as their own work. They even placed their company logo over the video as well.
Someone else was supplicating all of the time and effort placed into the video. I understand how anything on the Internet is capable of being copied. Basically that was what annoyed me the most was that the effort put forth to collect and present the information was not being recognized someone else was just taking it.
That seems small, no one harmed, right? That is somewhat correct. My company paid for me to make the video and the product was still being promoted. However what happened if it was not a sales tool but rather a picture of a landmark, a presentation about a topic, a system design, or a configuration file for a piece of equipment.
The information is being provided without compensation to the creator or even acknowledgment. Basically that person’s time, effort, and knowledge is being stolen. If it is licensed under Creative Commons terms the creator expects certain respect in the process. If it is not expressly stated that it is okay to use, it should not be used.
The best example is someone who is creating a presentation or proposal and need a picture of a movie theater. I found a nice theater image on Wikipedia taken by Fernando de Sousa from Melbourne, Australia and licensed under Creative Commons Attribution-Share Alike 2.0 Generic license. That license requires attribution. Mr. de Sousa is a professional photographer. He takes pictures for compensation. He shared his work, the results of his skill, equipment, experience, and knowledge. All that he asks for is credit. Will you provide it?
Think about it another way. You went through the process of creating a proposal for a project. You outlined the equipment and process you are going to use. You provided information about why you chose that approach. The person you made the proposal to decides not to hire you. Instead they take your proposal package and use it to create the project themselves. Would that annoy you? Would you expect compensation? How about if all you asked for was attribution?
So I ask everyone to please respect the Intellectual Property, time, effort, and knowledge that is provided on the Internet and provide attribution at least. Don’t take credit for other people’s work.
I am off to go place watermarks on my stuff, if you would like to use an image without it, just ask.